Hepatitis (Credit: Canva)

Updated Aug 28, 2024 | 03:01 PM IST

Hepatitis On Rise In India: What Is Causing It?

SummaryHepatitis is a general term that refers to inflammation of the liver caused by various factors like drugs, alcohol and food. This article explores the reasons behind its rise amongst in Indian children.

Hepatitis, a disease that causes inflammation of liver, is more prevalent than HIV in India and has a mortality rate exceeding nine times of TB. The inflammation of the liver can be caused by a number of things, including viruses, chemicals, drugs, alcohol, genetic disorders, or an overactive immune system. It usually presents with symptoms like fever, jaundice and abdominal pain, vomiting and nausea, loss of appetite and acute liver faiure.

Rising Hepatitis Cases In Children

As per Liver Specialists, the recent rise in hepatitis cases among children could be attributed to several factors including inadequate sanitation and hygiene practices, contamination of food and water supplies, low level vaccination coverage and increased exposure to hepatitis virus. Moreover, the cases rise of Hepatitis A and E, significantly rise in monsoon, sewages overflow and contaminate water sources.

According to Dr BS Ahuja, M.B.B.S, M.D (medicine) at Kharay Hospital, Ludhiana, said "Street food is the largest cause of liver infection through contaminated food and water in India", he said. Adding further, Dr Ahuja opined, "While most liver infections are self-limiting, meaning they resolve on their own, about 2% can become life-threatening, especially if left undetected".

Is Diet Important In Preventing Hepatitis?

Diet plays a crucial role in both the prevention and management of liver infections, particularly Hepatitis. Even in extreme cases of infection, proper hydration is the key, besides eating nutrient-rich food. Avoiding certain foods, especially those prepared under unhygienic conditions plays a crucial role when it comes to prevention.

Street foods like panipuri and chaat are particularly risky. Food items involving unboiled water, raw salads and juices also put you at risk. Dr Thiagarajan Srinivasan, Liver Transplant Specialist at MGM Healthcare, emphasises that even food cooked at home should be handled with care. "Avoid eating food that was cooked more than 12 hours ago. Additionally, food should only be reheated once, and fried foods should not be reheated at all."

He also talked about the concerning trend which involves the use of used cooking oil by smaller eateries as a cost-cutting measure. These oil, often sourced from high-end restaurants, pose serious health risks and should be avoided at all costs.

End of Article
Why Its Important To Check The Expiry Date On Your Pregnancy Test?

Updated Apr 25, 2025 | 10:00 PM IST

Why Its Important To Check The Expiry Date On Your Pregnancy Test?

SummaryPregnancy tests detect the hormone hCG in urine and are up to 99% accurate when used correctly, but using an expired test can lead to false results and delayed care.

If you're trying to conceive or even think you might be pregnant, the wait and anticipation for a pregnancy test can be nerve-wracking—hope, worry, excitement, or fear all in one little plastic stick but before you rip open that foil package, there's something important you may be forgetting: the expiration date.

Yes, pregnancy kits do have expiry dates. And taking one which has passed that date may cause false results. This article touches on why checking that date on the kit first is important before you test, how pregnancy kits work, and what dangers such expired kits possess. Supported by expert opinion and scientific knowledge, this guide endeavors to equip you with the knowledge you require for making informed reproductive health choices.

Home pregnancy tests detect the human chorionic gonadotropin (hCG) hormone in your urine, which your body begins making shortly after the fertilized egg implants in your uterus. The test sticks use special antibodies with chemicals that have been treated to respond to hCG and report a positive finding—usually lines, plus symbols, or messages on a display.

With time, though, the delicate components break down. After the test has reached or exceeded its expiration date, the chemical reagents can no longer act dependably. That is, the test might not register hCG when it's actually there, providing you with a false negative result, or—much less often—report a false positive based on poor chemical reactions.

What Happens When a Pregnancy Test Expires?

The date of expiration on a pregnancy test is not merely a courtesy. Companies test their products extensively to find out how long the ingredients will be stable and consistent under normal storage conditions. A pregnancy test will usually be effective for one to three years from the date of manufacture.

Once that time has passed, the antibodies that are employed to identify hCG start to weaken. This weakening is subtle but significant—making the test incapable of giving accurate results. The older the test, the greater the likelihood that you'll leave with a result that doesn't accurately represent your pregnancy status.

Just as important as the expiration date is how the test is stored. According to healthcare professionals, the performance of a pregnancy test can deteriorate even before its listed expiry if it’s stored improperly.

Avoid exposing the test to heat, moisture, or direct sunlight. A bathroom medicine cabinet, while convenient, is often not ideal due to the humidity from showers and temperature fluctuations. Instead, keep pregnancy tests in a cool, dry place, and avoid unwrapping individual tests until you’re ready to use them. Unsealing the protective foil can introduce air and moisture that degrade the chemicals faster.

How to Identify an Expired Test?

Always inspect the outer package and test wrapper individually for a printed expiration date. If it is absent or smudged, better not take a risk. Also, beware of buying tests from third-party retailers or online stores where expired stock may go unnoticed.

It's also good to know that even tests just purchased can be old inventory. If you've had a test kit in your bathroom drawer for more than one year, verify the printed date before you use it.

Can You Trust an Expired Test?

Technically, it's possible for an outdated pregnancy test to return a correct result—but it's not reliable. The odds of false negatives grow more sharply with time, which can cause confusion, worry, and delay in obtaining critical prenatal care.

Under FDA recommendations, most erroneous results from past-due tests are likely to be false negatives. This may lead one to continue habits or drugs that are not best practiced in early pregnancy—or lose the opportunity to start early prenatal supplements or tests.

The effect of depending on an out-of-date pregnancy test isn't only medical—it's psychological as well. Inaccurate results can induce undue distress, confusion, or early rejoicing. Even worse, they may stall time-critical health choices like verifying the pregnancy through a physician, making blood work appointments, or starting lifestyle modifications to facilitate a healthy pregnancy.

In medical situations where time is of the essence—like watching over high-risk pregnancies or starting specific treatments—true, timely information is paramount.

Best Practices for Taking a Home Pregnancy Test

To ensure most accurate results, follow these steps:

  • Inspect the expiration date before taking any test, even if the package appears new.
  • Take first-morning urine when hCG is most concentrated in the urine.
  • Wait until the first day of your missed period to take the test; testing earlier riskily produces a false negative.
  • Take directions exactly, including timing when to read the results.
  • Dispose of unused tests properly, in a dry, cool environment and in their original sealed package.

How Expired Pregnancy Tests Impact Health and Results?

Taking an expired pregnancy test can result in incorrect results, which might lead to undue confusion or undue delay in taking the appropriate next step. Here's what you should know regarding the effectiveness of an expired pregnancy test:

Increased Chance of False Negatives

One of the most significant problems with using an outdated pregnancy test is the increased likelihood of getting a false negative result. This is where the test will show that you're not pregnant when you actually are. This is due to the chemical compounds, especially the antibodies employed to identify hCG, breaking down over time, thus it becomes hard for the test to give a true result.

Degraded Antibodies

Pregnancy tests detect human Chorionic Gonadotropin (hCG), a hormone that is formed during pregnancy. After a while, the antibodies in the test, which cause a response when hCG is present, become weakened. So even if you are pregnant, the test may fail to measure the hormone at a level that is high enough.

Health Risks

As per the U.S. Food and Drug Administration (FDA), expired pregnancy tests tend to give false negatives rather than false positives. A false positive may also occur but is less so with expired tests.

Exposure to External Factors

The reliability of a pregnancy test is also affected by the way it's stored. Incorrect storage, for example exposure to sunlight, humidity, or heat, causes the components to degrade faster and results in more opportunities for getting incorrect results prior to reaching expiration.

Waste of Time and Money

Using an expired test not only reduces the likelihood of getting an accurate result but also wastes your time and money. It's best to check the expiration date before using the test and, if expired, purchase a new one for peace of mind and more reliable results.

Emotional Stress

The effect of depending on an out-of-date pregnancy test isn't only medical—it's psychological as well. Inaccurate results can induce undue distress, confusion, or early rejoicing.

Though home pregnancy tests are an efficient and convenient means of early pregnancy detection, their accuracy relies on a number of major factors, foremost among them their expiration date. Testing with one that has expired may cause emotional distress and delay medical attention at a time when it's needed most.

End of Article
Fearing Mosquitos? Malaria Can Be Spread Through Blood Transfusion Also

Credit: Canva

Updated Apr 25, 2025 | 09:00 PM IST

Can You Get Malaria Without Mosquito Bite?

SummaryMalaria is a vector-borne disease. It is spread through female anopheles mosquitoes. These mosquitoes carry single-cell P. Falciparum, which is a pathogen behind this disease.

Malaria is a life-threatening disease that is spread to humans by a specific type of mosquito. It is preventable and curable, but only if detected on time. People who are at high risk include travellers, pregnant women and those with HIV/AIDS. On Friday, while marking World Malaria Day, the World Health Organisation (WHO) asserted that half of the total global population is at risk of this vector borne disease. So now, the question arises: how does it spread?

Malaria is a vector-borne disease. It is spread through female anopheles mosquitoes. These mosquitoes carry single-cell P. Falciparum, which is a pathogen behind this disease. There are five types of Plasmodium parasite, with P. Falciparum (which is found in the African region) and P. Vivax ( common outside the sub-Saharan region) being the most popular. Left untreated, P. Falciparum malaria can progress to severe illness and death within 24 hours.

Malaria Can Be Spread Through Blood Transfusion

But there is empirical evidence that it can also be transmitted through blood transfusion and contaminated needles. Transfusion-transmitted malaria (TTM) occurs when an uninfected person receives blood from a donor who is infected with malaria parasites. While malaria transmission through transfusion is rare, especially in non-endemic areas, it remains a significant concern in certain regions.

According to a systematic review of studies conducted by National Library of Medicine, Plasmodium parasites were shown to survive in whole blood and plasma when stored at 4°C for up to 18 days, and detectable parasites can present even up to 28 days when frozen, although with diminished infectivity.

How To Identify Malaria?

The early symptoms of Malaria are fever, headache and chills, which can usually start within 10 to 15 days of getting bitten by an infected mosquito. Some types of malaria can cause severe illness and death. Infants, children under 5 years, pregnant women, travellers and people with HIV or AIDS are at higher risk. Severe symptoms include:

  • extreme tiredness and fatigue
  • impaired consciousness
  • multiple convulsions
  • difficulty breathing
  • dark or bloody urine
  • jaundice (yellowing of the eyes and skin)
  • abnormal bleeding
People with severe symptoms should get emergency care right away. Getting treatment early for mild malaria can stop the infection from becoming severe. Malaria infection during pregnancy can also cause premature delivery or delivery of a baby with low birth weight.

Disproportionate Share Of Global Malaria Burden

The WHO African Region continues to carry a disproportionately high share of the global malaria burden. In 2023, the region was home to about 94% of all malaria cases and 95% of deaths. Children under 5 years of age accounted for about 76% of all malaria deaths in this region. Over half of these deaths occurred in four countries: Nigeria (30.9%), the Democratic Republic of the Congo (11.3%), Niger (5.9%) and United Republic of Tanzania (4.3%).

End of Article
Could 3D Printing End the Organ Shortage Crisis?

Credit: Canva

Updated Apr 25, 2025 | 05:36 PM IST

Could 3D Printing End the Organ Shortage Crisis?

Summary The demand for organs far outweighs the supply, leaving many patients with little hope. But what if I told you that you could practically 3D print the organ in demand?

Each year, hundreds of people around the world lose their lives waiting for a life-saving organ transplant. The demand for organs far outweighs the supply, leaving many patients with little hope. But what if we could print organs—tailor-made for each patient—using their own cells? While we're not quite there yet, researchers are making significant strides in this futuristic field known as 3d bioprinting.

Though the technology is still far from clinical trials, scientists believe that when 3d-printed organs become a medical reality, the process will likely involve a blend of cutting-edge imaging, personalised cell harvesting, and highly advanced bioprinting methods. Here's what this groundbreaking process could look like.

Step 1: Creating a Personalised 3D Model

To print a functional organ, the process begins with creating a precise 3D blueprint. While generic models can serve as a starting point, personalisation is key. Using imaging technologies like MRI (Magnetic Resonance Imaging) and CT (Computed Tomography) scans, medical professionals can generate a detailed digital model of the organ tailored specifically to the patient’s anatomy. This personalized design enhances the chances of a successful transplant by ensuring the printed organ will fit and function properly in the recipient’s body.

Step 2: Collecting Patient’s Cells And Preparing Bioink

One of the biggest hurdles in organ transplantation is rejection, which happens when the recipient’s immune system attacks the new organ. To reduce this risk, scientists aim to use the patient’s own cells to build the organ. These cells are harvested, cultivated in labs, and combined with a specially designed “bioink”—a gel-like substance engineered to mimic the structure of natural tissues. This bioink becomes the medium through which living cells can be precisely layered and formed into complex biological structures.

Step 3: Printing the Organ

With a personalized 3D model in hand and a supply of bioink rich in the patient’s cells, the actual printing process begins. The organ is built layer by layer, using bioprinters designed to handle delicate biological material. Some methods involve extrusion-based bioprinting, which pushes the bioink through a nozzle to form a structure, similar to how icing is piped onto a cake. Other techniques rely on light-based bioprinting, which uses beams of light to shape the biomaterial with incredible precision.

In some cases, additional cells may be added to the organ after printing to support its development or enhance functionality. Although the exact tools and materials are still being refined, technologies such as the BIO X, BIO X6, and LUMEN X are among those helping to push the boundaries of what’s possible in tissue engineering.

Road Ahead

While researchers are still navigating numerous scientific and ethical challenges, the vision of printing fully functional, transplantable organs is no longer science fiction. With continued innovation and global collaboration, 3D bioprinting could one day eliminate organ shortages altogether, saving countless lives and revolutionizing modern medicine.

End of Article